company news about Usage of Pneumatic Hydraulic Riveting Tool

• - The tool should be used exclusively to apply blind rivet nuts prescribed as TOOL CAPACITY. It can not be used for other purposes, such as hammer, etc;

• - The tool should be always operated with compressed air supply within the air pressure range 0,5Mpa ~ 0,7Mpa;

• - To DISCONNECT the air supply from the tool before changing the tool parts, such as mandrel, etc;

• - DO NOT use the tool in the environment described as below:

fuel and combustion air;

temperature rapidly rising;

humidity, rain, water, storm and thundering;

• - When the tool is suspended by the operation hook during use, be sure the tool will not fall;

• - When using the tool, always carry protective goggles, protective gloves, safety helmet, and other necessary protections. It is highly recommended for safety reason;

• - To use only genuine spare parts for repairs;

• - The repair work must be carried out by skilled personnel, when in doubt, always return the tool to the distributor.